-47%

Airspy R2

Availability:

Out of stock


Airspy R2 is an advanced open-source software defined radio receiver with adequate dynamic range, capable of sampling 10MHz of spectrum anywhere between 24MHz and 1.8GHz – and even beyond with extensions.

14,890.00 28,000.00

Out of stock

42,267.00 for 3 item(s)

Overview

Airspy R2 sets a new level of performance in the reception of the VHF and UHF bands thanks to its low-IF architecture, high quality ADC and state of the art DSP.

The coverage can be extended to the HF bands via the SpyVerter up-converter companion.

The Airspy R2, like its predecessor is 100% compatible with all the existing software including the de facto scanning standard SDR#, but also a number of popular software defined radio applications such as SDR-Radio, HDSDR, GQRX and GNU Radio.

For a more complete list of supported software, check the download page.

Supported platforms

  • Windows Vista, 7, 8, 8.1 and 10 (For Windows XP, please contact the airspy team)
  • Linux
  • *BSD
  • OSX

Technical specifications:

  • Continuous 24 – 1800 MHz native RX range, down to DC with the SpyVerter option
  • 3.5 dB NF between 42 and 1002 MHz
  • Tracking RF filters
  • 35dBm IIP3 RF front end
  • 12bit ADC @ 20 MSPS (10.4 ENOB, 70dB SNR, 95dB SFDR)
  • 10MSPS IQ output
  • Experimental 2.5MSPS IQ output for low power devices (Raspberry Pi, Odroid, etc.)
  • Up to 80 MSPS when using custom firmware
  • Cortex M4F @ up to 204MHz with Multi Core support (dual M0)
  • 0.5 ppm high precision, low phase noise clock
  • 1 RTC clock (for packet time-stamping)
  • External clock input (10 MHz to 100 MHz via MCX connector) – Ideal for phase coherent radios
  • 10 MHz panoramic spectrum view with up to 9MHz alias/image free
  • IQ or Real, 16bit fixed or 32bit float output streams
  • No IQ imbalanceDC offset or 1/F noise at the center of the spectrum that plagues all the other SDRs
  • Extension ports: 16 x SGPIO
  • 1 x RF Input (SMA connector, up to 30kV ESD protection)
  • 1 x RF Output (Loopthrough, U-FL, 15kV ESD protection)
  • 2 x High Speed ADC inputs (up to 80 MSPS, U-FL, DC coupled, 15kV ESD protection)
  • 4.5v software switched Bias-Tee to power LNA’s and up/down-converters
  • 8 x programmable high speed gpio’s up to 100MHz
  • 3 x programmable synchronized clock outputs up to 160MHz
  • 1 x core CPU clock output
  • 1 x reset pin
  • 2 x regulated +5.0 and +3.3v pins
  • 1 x JTAG header
  • No drivers required! 100% Plug-and-play on Windows Vista, Seven, 8, 8.1 and 10
  • Operating temperature: -10°C to 40°C

Minimum hardware requirements

  • 3rd gen Intel i3 2.4 GHz CPU or equivalent
  • 2GB of RAM (to run your own OS, airspy barely needs 1MB of memory)
  • High speed USB 2.0 controller

Supported Software

Developer API

  • Open source multi-platform libairspy and airspy host tools at github
  • Open source airspy firmware at github
  • Linux kernel SDR API (by Antti Palosaari) at github

Pin and Port Assignments

AirSpy NOS R2 Pin Assignment

Packing list

  • Airspy R2 *1
  • Micro USB*1

Please click here to contact with Airspy Team, or go to Airspy forum to join the discussion.

SKU: IM141027001 Category:
Weight 0.126 kg
Dimensions 6.4 × 3.5 × 2.9 cm

Technical specifications:

  • Continuous 24 – 1800 MHz native RX range, down to DC with the SpyVerter option
  • 3.5 dB NF between 42 and 1002 MHz
  • Tracking RF filters
  • 35dBm IIP3 RF front end
  • 12bit ADC @ 20 MSPS (10.4 ENOB, 70dB SNR, 95dB SFDR)
  • 10MSPS IQ output
  • Experimental 2.5MSPS IQ output for low power devices (Raspberry Pi, Odroid, etc.)
  • Up to 80 MSPS when using custom firmware
  • Cortex M4F @ up to 204MHz with Multi Core support (dual M0)
  • 0.5 ppm high precision, low phase noise clock
  • 1 RTC clock (for packet time-stamping)
  • External clock input (10 MHz to 100 MHz via MCX connector) – Ideal for phase coherent radios
  • 10 MHz panoramic spectrum view with up to 9MHz alias/image free
  • IQ or Real, 16bit fixed or 32bit float output streams
  • No IQ imbalanceDC offset or 1/F noise at the center of the spectrum that plagues all the other SDRs
  • Extension ports: 16 x SGPIO
  • 1 x RF Input (SMA connector, up to 30kV ESD protection)
  • 1 x RF Output (Loopthrough, U-FL, 15kV ESD protection)
  • 2 x High Speed ADC inputs (up to 80 MSPS, U-FL, DC coupled, 15kV ESD protection)
  • 4.5v software switched Bias-Tee to power LNA’s and up/down-converters
  • 8 x programmable high speed gpio’s up to 100MHz
  • 3 x programmable synchronized clock outputs up to 160MHz
  • 1 x core CPU clock output
  • 1 x reset pin
  • 2 x regulated +5.0 and +3.3v pins
  • 1 x JTAG header
  • No drivers required! 100% Plug-and-play on Windows Vista, Seven, 8, 8.1 and 10
  • Operating temperature: -10°C to 40°C

Warranty Condition

Does this product checked before shipping them to me?

Yes., of course.We have a professional Quality Control team. They will check carefully for each item we received from factory to avoid sending defective goods to our customers.

If a item is found defective in our Technical QC  team , it will be returned to the factory. Please don’t worry about receiving a defective item because we are committed to being a trustworthy

Products Guaranteed

Factories that supply Sonoff are strictly evaluated by us, and we provide you an even better reassurance of consistent  high quality thanks to our Sonoff Technical QC team. We double-check the contents of all orders carefully before dispatch to our customers a. Sonoff will maintain all product serial number and products ID for stop delicacy.

Lead time

Processing time 1-2 business days normally: During this period, we do strict quality-control tests and get the items carefully packed.

Delivery time

Delivery time 3-8 business days normally in India.

 Who will be delivered the product to me

You order  will dispatch from your nearest local authorized dealer by ShipRocket/Delhivery.com.

What should I do if my items arrived damaged?

When using shipping services, we want the delivery to be as fast as possible. At the same time, we expect from the courier company to handle our shipments with great care throughout their journey. Packages reach several depots and go through multiple hands until the driver delivers them to their recipients. Even though we might assume it is the courier’s fault for the damaged delivery of the parcel, several other situations explain it is not always the case.

If you order got damaged or lost during transits so  Rarely, rough handling by the courier can lead to physical damage to your goods, e.g. broken screen. In this condition, Apply for Insurance claim terms & conditions applicable.

Bulk Order

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Airspy R2”

There are no reviews yet.

You may also like…