-77%

ESP-12F: ESP8266 Remote Serial Port WIFI Transceiver Wireless Module AP+STA

Availability:

78 in stock


ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.

„ The smallest 802.11b/g/n Wi-Fi SOC module
„ Low power 32-bit CPU, can also serve as the application processor
„ Up to 160MHz clock speed
„ Built-in 10 bit high precision ADC
„ Supports UART/GPIO/IIC/PWM/ADC
„ SMD-22 package for easy welding
„ Integrated Wi-Fi MAC/BB/RF/PA/LNA
„ Support multiple sleep patterns. Deep sleep current as low as 20uA
„ UART baud rate up to 4Mbps
„ Embedded LWIP protocol stack
„ Supports STA/AP/STA + AP operation mode
„ Support Smart Config/AirKiss technology
„ Supports remote firmware upgrade (FOTA)
„ General AT commands can be used quickly
„ Support for the two development, integration of windows, Linux development environment Ai-T

138.00 600.00 Excluding GST

78 in stock

Compare

Overview

ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.

ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.

Features

  • Standards Certification: FCC / CE / TELEC
  • Wireless standards: 802.11 b / g / n
  • Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
  • Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
  • Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
  • Working Current: Average: 80mA
  • Operating temperature: -40 ° ~ 125 °
  • Storage temperature: Nomal temperature

ADDITIONAL INFORMATION

Discontinued No
Link Wiki No
EWeLink Support No
Module Type No
Weight 2 g
Model IM151228001/ESP-12F
Board Size 2.5CM X 1.5CM X 0.5CM
Version esp-12f
Operation Level Digital 3.3V

The ESP-12F WiFi module was developed by Ai-Thinker Technology. The core processor ESP8266 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU in a small package with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA.

The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers.

The ESP8266 is a high-performance wireless SOC that offers maximum utility at the lowest
cost and unlimited possibilities for embedding WiFi functionality into other systems.

The ESP8266 is a complete and self-contained WiFi network solution that can operate independently or as a slave running on other host MCUs. The ESP8266 is capable of booting directly from an external flash memory when it is powered by an application and is the only application processor in the device. The built-in cache helps improve system performance and reduce memory requirements.

In another case, the ESP8266 is responsible for wireless Internet access. When it comes to the task of the WiFi adapter, it can be added to any micro controller-based design. The connection is simple and easy, just by SPI / SDIO interface or I2C / UART port. Just fine.

The ESP8266’s powerful on-chip processing and storage capabilities allow it to integrate sensors and other application-specific devices through the GPIO port, minimizing system resources during minimal up-front development and operation.

2.  Pin Definition
The ESP-12 module leads to 16 pins.
Figure 2.1    ESP-12F Pin diagram
Table 2.2 Pin function description
No. Pin Name Functional Description
1 RST Reset Pin, Active Low
2 ADC AD conversion, Input voltage range 0~1V, the value range
is 0~1024.
3 EN Chip Enabled Pin, Active High
4 IO16 Connect with RST pin to wake up Deep Sleep
5 IO14 GPIO14; HSPI_CLK
6 IO12 GPIO12; HSPI_MISO
7 IO13 GPIO13; HSPI_MOSI; UART0_CTS
8 VCC Module power supply pin, Voltage 3.0V ~ 3.6V
9 GND GND
10 IO15 GPIO15; MTDO; HSPICS; UART0_RTS
11 IO2 GPIO2; UART1_TXD
12 IO0 GPIO0;HSPI_MISO;I2SI_DATA
13 IO4 GPIO4
14 IO5 GPIO5;IR_R
15 RXD UART0_RXD; GPIO3
16 TXD UART0_TXD; GPIO1
SKU: ESP-12F Category: Tag:
Weight 0.002 kg

ADDITIONAL INFORMATION

Discontinued No
Link Wiki No
EWeLink Support No
Module Type No
Weight 2 g
Model IM151228001
Board Size 2.5CM X 1.5CM X 0.5CM
Version esp-12f
Operation Level Digital 3.3V

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ESP-12F: ESP8266 Remote Serial Port WIFI Transceiver Wireless Module AP+STA”

There are no reviews yet.

You may also like…