LoRa™ modem
• Support FSK, GFSK, MSK, GMSK, LoRa™ and OOK modulation methods
• Support frequency band 410MHz~525MHz
• Working voltage is 3.3V, maximum output +20dBm, maximum working current is 105mA
• Low power in receiving state Power consumption characteristics, the receiving current is 12.15mA, the standby current is 1.6mA
• High sensitivity: as low as -140dBm
• Small size dual-row stamp hole patch package
• The module adopts SPI interface, uses half-duplex communication, with CRC, up to 256 words Packet engine

 Complete 802.11b/g/n Wi-Fi + BLE SoC module, data rate up to 150Mbps
 TG-12F chip is 32-bit RISC CPU with FPU (floating point unit), operating
frequency up to 192 MHz. The chip has built-in 276 KB SRAM and 128 KB ROM.
 Support SDIO/SPI/UART/I2C/IR remote/PWM/ADC/DAC/PIR/GPIO interface.
 SMD-22 package
 Integrated Wi-Fi MAC/ BB/RF/PA/LNA
 Support multiple sleep modes, deep sleep current is less than 30uA
 Support UART port local upgrade and remote firmware upgrade (FOTA)
 General AT commands can be quick and easy use
 Support secondary development, integrated Linux development environment

Support 802.11b/g/n
WIFI frequency range 2400 ~ 2483.5MHz
Interface Type: Standard micro USB+ 2.54mm spacing pin header
UART/GPIO/ADC/PWM/I2C/I2S interface provided
Bring R/G/B three-in-one lamp beads
Integrated Wi-Fi MAC/BB/RF/PA/LNA
Cascade rate up to 4 Mbps
Embedded Lwip protocol stack
Supporting STA/AP/STA AP operating model
One-click configuration for Android, IOS Smart Config (APP)/AirKiss
Supports local serial port upgrades and remote firmware upgrades (FOTA)
Generic AT instructions can be used quickly
Supports secondary development, integrates Windows、Linux development environment