-
DIY Mode Switches, Ewelink Devices, RF SWITCHES
SONOFF RFR3 – WIFI DIY Smart RF Control Switch
- Manage devices from your phone, anywhere and anytime.
- Support Amazon Alexa & Google Assistant to turn on/off devices.
- Make one device trigger on/off another one or groups of devices.
- Control devices with a remote controller with 433MHz.
- Control SONOFF devices with the utilization of IFTTT supported app and services.
- The DIY Mode allows you to use the REST API to connect SONOFF RFR3 with your existing home automation system.
- Turn on/off the device when no Wi-Fi access in LAN Mode.
- Share devices with your family to control together.
- Show the real-time status on the eWeLink app for devices.
- Can connect an old phone to make it monitor and control devices.
SKU: IM190314002
SpyVerter R2 builds on top of the successful SpyVerter architecture and improves some of the key points of high performance HF reception. We designed the SpyVerter R2 to extend the coverage of the Airspy receiver series to the HF down to virtually DC with world class dynamic range, frequency stability and sensitivity to rival with high end analog designs at a very affordable price. You have no excuse to use low performance receivers that require more filtering than your entire shack, killing the signals of interest along the way!
The architecture is still based on our switched double balanced mixer that moves the entire HF spectrum to the VHF band between 120 MHz and 180 MHz. We replaced the LO generator with a programmable, low phase noise PLL with 0.5 PPM VCTCXO. The Voltage control of this VCTCXO allows fine calibration of the operating frequency at the factory.
The embedded microcontroller provides both the programming of the PLL (Si5351C) and the voltage control via its embedded DAC. Once the DAC is settled and the PLL is programmed, the microcontroller enters a deep sleep mode to eliminate any interference.
We also added a 10MHz reference input clock for professional usages where phase coherency is required.
When used with an Airspy receiver, the SpyVerter R2 can be powered from the integrated Bias-Tee, and only uses ~10mA of current (versus 47mA in the old design). This improves battery operation dramatically!
An extra USB power supply input is provided for compatibility with receivers like RTL-SDR.
Technical specifications
- RF Input 1kHz to 60 MHz
- IF Frequency 120 MHz – Positive Image
- Technology: Switched Double Balanced Mixer
- Conversion loss: 5.2 dB typ.
- 35 dBm IIP3
- LO leakage: -42dBm typ. (12 dB lower than the original SpyVerter)
- Phase noise at 10kHz separation: -122 dBc/Hz
- RF Filtering: Low Pass Filter with corner at 65 MHz – 75dB ultimate rejection
- IF Filtering: Band Pass Filter with corners at 120 MHz and 180 MHz – 75dB ultimate rejection
- Max RF power: 10 dBm
- Bias-tee voltage: 4.2v to 5.5v
- Current consumption: 10mA typ.
-
Additional information
Weight 108 g Dimensions 53 × 40 × 25 mm
Compatibility
Pack List
- Spyverter *1
- SMA male To SMA male plug *2
- SMA male to SMA male connecter with 5cm coaxial cable *1
Please click here to contact with Airspy Team, or go to Airspy IRC channel (Freenode channel #airspy) to join the discussion.
Weight | 0.108 kg |
---|
Technical specifications
- RF Input 1kHz to 60 MHz
- IF Frequency 120 MHz – Positive Image
- Technology: Switched Double Balanced Mixer
- Conversion loss: 5.2 dB typ.
- 35 dBm IIP3
- LO leakage: -42dBm typ. (12 dB lower than the original SpyVerter)
- Phase noise at 10kHz separation: -122 dBc/Hz
- RF Filtering: Low Pass Filter with corner at 65 MHz – 75dB ultimate rejection
- IF Filtering: Band Pass Filter with corners at 120 MHz and 180 MHz – 75dB ultimate rejection
- Max RF power: 10 dBm
- Bias-tee voltage: 4.2v to 5.5v
- Current consumption: 10mA typ
Based on 0 reviews
You may also like…
-
DIY Kits
NRF24L01 Module2.4GHZ Wireless Transceiver module for Arduino
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
SKU: NRF24L01 -
DIY Kits, Smart Home
Powertip PC1602F-B Alphanumeric LCD Display 16×2
- Very low power consumption (typically 1mA)
- Single power supply +5V
- TTL and CMOS compatible
- Easily interfaced to 4 or 8-bit microprocessors
- CMOS controller and drivers
- Grey background with navy blue characters on screen
- Powerful control commands: Display – clear, on/off, shift set function; Cursor – home, address set
- Operational temperature range 0°C to +50°C
May connect with nebulizer to have nebulizing cure.SKU: Powertip PC1602F-B -
Ewelink Devices, DC Supply, DIY Kits
SONOFF RE5V1C – 5V Wifi Inching/Selflock Relay Module
- Nano Size
- Dry Contact Output
- Low Power Supply – 5VDC low voltage input
- LAN Control – Turn on/off the device even when WiFi has no Internet access
- App Support – Free iOS and Android mobile App eWeLink
- Remote ON/OFF–Turn electrical devices on/off from anywhere
- Sync Status–Real-time device status provided to App
- Timing–Set scheduled/countdown timers to turn on/off at specified time
- Share Control– Control your smart home together with your family
- Scene–Turn on/off a gang of devices with one tap
- Smart Scene–Triggered on/off by temp, hum or other environmental conditions from sensor
- Compatibility –Works perfectly with Amazon Alexa, Google Assistant, IFTTT, Google Nest
SKU: IM171018005
There are no reviews yet.