Zigbee CC2531 USB Dongle Sniffer Bare Board Packet Protocol Analyzer Module USB Interface Dongle Capture Packet
11 in stock
The CC2531 USB dongle is a fully operational USB device which provides a PC interface to IEEE802.15.4 / ZigBee applications, comes with a CC2531ZNP-Prod firmware, the dongle can be plugged directly into your PC/Raspberry etc used as a Zigbee packet sniffer.
₹758.00 ₹2,800.00
11 in stock
To run zigbee2mqtt for the control of SONOFF Zigbee products like BASICZBR3, S31 Lite Zb in your home automation system, a CC2531 USB dongle integration is recommended. The CC2531 USB dongle is a fully operational USB device which provides a PC interface to IEEE802.15.4 / ZigBee applications, comes with a CC2531ZNP-Prod firmware, the dongle can be plugged directly into your PC/Raspberry etc used as a Zigbee packet sniffer.
Yup, it is a ready-to-go CC2531 USB dongle for zigbee2mqtt application
CC2531 USB dongle hardware description:
The Debug connector:
The IO connector:
Features:
-
Flashed with CC2531ZNP-Prod firmware for zigbee2mqtt application
-
Lead out 8 IO connectors
-
Debug interface
-
Size: 5.6*1.6*0.7cm
-
Two buttons and two LEDs for user interaction
How to integrate the SONOFF Zigbee products into your home automation system? Please refer to the website of zigbee2mqtt.io for more information. As ITEAD has already done the firmware flash of CC2531ZNP-Prod for CC2531 USB dongle, you can directly start with the section of “Running Zigbee2mqtt”
| Weight | 0.058 kg |
|---|---|
| brands | iTead |
| Discontinued | No |
| Link Wiki | No |
| EWeLink Support | No |
| Module Type | Wireless |
| Weight | 6 g |
| Model | M0802010007 |
| Board Size | 4.1*1.6cm |
| Version | 1 |
| Operation Level | Other |
Based on 4 reviews
You may also like…
-
DIY Kits
Ai-Thinker TG-12F TG7100C chip WiFi+BT combo module pins to ESP-12F
Complete 802.11b/g/n Wi-Fi + BLE SoC module, data rate up to 150Mbps
TG-12F chip is 32-bit RISC CPU with FPU (floating point unit), operating
frequency up to 192 MHz. The chip has built-in 276 KB SRAM and 128 KB ROM.
Support SDIO/SPI/UART/I2C/IR remote/PWM/ADC/DAC/PIR/GPIO interface.
SMD-22 package
Integrated Wi-Fi MAC/ BB/RF/PA/LNA
Support multiple sleep modes, deep sleep current is less than 30uA
Support UART port local upgrade and remote firmware upgrade (FOTA)
General AT commands can be quick and easy use
Support secondary development, integrated Linux development environmentSKU: TG-12F -
DIY Kits
ESP8266 ESP-12F NodeMcu Lua WiFi Development Board
Support 802.11b/g/n
WIFI frequency range 2400 ~ 2483.5MHz
Interface Type: Standard micro USB+ 2.54mm spacing pin header
UART/GPIO/ADC/PWM/I2C/I2S interface provided
Bring R/G/B three-in-one lamp beads
Integrated Wi-Fi MAC/BB/RF/PA/LNA
Cascade rate up to 4 Mbps
Embedded Lwip protocol stack
Supporting STA/AP/STA AP operating model
One-click configuration for Android, IOS Smart Config (APP)/AirKiss
Supports local serial port upgrades and remote firmware upgrades (FOTA)
Generic AT instructions can be used quickly
Supports secondary development, integrates Windows、Linux development environmentSKU: NodeMCU-8266-12F -
DIY Kits
ESP-01: ESP8266 Serial Wifi Wireless Transceiver Networking Module For Arduino
ESP8266 offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Perfect and simple AT commands.
SKU: ESP-01-ESP8266 -
DIY Kits
Ai-Thinker ESP-12S ESP8266 Wifi Module ESP8266 Serial IOT WIFI wireless module wireless transceiver module
DIY KitsAi-Thinker ESP-12S ESP8266 Wifi Module ESP8266 Serial IOT WIFI wireless module wireless transceiver module
The smallest 802.11b/g/n Wi-Fi SOC module
Low power 32-bit CPU, can also serve as the application processor
Up to 160MHz clock speed
Built-in 10 bit high precision ADC
Supports UART/GPIO/IIC/PWM/ADC
SMD-16 package for easy welding
Integrated Wi-Fi MAC/BB/RF/PA/LNA
Support multiple sleep patterns. Deep sleep current as low as 20uA
UART baud rate up to 4Mbps
Embedded LWIP protocol stack
Supports STA/AP/STA + AP operation mode
Support Smart Config/AirKiss technology
Supports remote firmware upgrade (FOTA)
General AT commands can be used quickly
Support for the two development, integration of windows, Linux developmentSKU: ESP-12S
Related products
-
Ewelink Devices, DIY Mode Switches, Heavy Load
Turn Your AC into Smart Ac with Sonoff POWR2 Smart WiFi Plug Switch
Ewelink Devices, DIY Mode Switches, Heavy LoadTurn Your AC into Smart Ac with Sonoff POWR2 Smart WiFi Plug Switch
- Remote Control –Turn electronic devices on/off from anywhere
- Monitor Energy Usage –Keep track of live power, current and voltage of your appliances on App
- Historical Energy Consumption –100-day daily/monthly energy usage data and total electricity cost
- Overload Protection –Set power, current and voltage threshold values to let appliances auto-off
- Measure Power Usage for a Period –Measure your appliances’ power consumption for a specified time
- Sync Status–Real-time device status provided to App
- Timing Function –Supports 8 enabled scheduled/countdown timers
- Share Control –Invite your family to control your smart home together
- Scene–Turn on/off a gang of devices with one tap or triggered on/off by another smart device
- Smart Scene–Triggered on/off by temp, hum or other environmental conditions from a sensor
- APP Supported –Free iOS and Android eWeLink app
- Compatibility –Works perfectly with Amazon Alexa, Google Assistant, IFTTT, Google Nest
This is a highly customizable product. Based on the original prototype, consumers can get a product customized according to their personal requirements.SKU: 6920075733259 -
Ewelink Devices, DIY Mode Switches
SONOFF THR316 Elite Smart Temperature and Humidity Monitoring Switch
Ewelink Devices, DIY Mode SwitchesSONOFF THR316 Elite Smart Temperature and Humidity Monitoring Switch
【20A Max & Dry Contact Output】 Support to connect 20A Max high load, dry contact output.
【LCD Screen】Real-time monitoring of temperature and humidity data, the screen refreshed every 5S.
【6-Month Temp & Humi Historical Data by Hours】 Support to review the temp & hum history data by hour, day and month. Past 6-month history data can be exported in .xlsx format and accurate to hour.
【Local Automatic Control】Support LAN control, automatic control is more reliable. You can set 8 automatic control programs for you to save electricity bills and create comfortable surroundings.
【Voice Control and Query】Work with Alexa, Google Assistant, you can query temperature and humidity values by your voice.Note 1: Each sensor (Si7021, AM2301, and MS01) need RJ11 adapter to fit for TH Elite.
Note 2: The RL560 is the new sensor extension cable with RJ11, it can connect the SONOFF temperature and humidity sensors to extend your device’s distance. AM2301, DS18B20, Si7021 can be extended to 60M, and MS01 soil moisture sensor can be extended to 10M.SKU: 6920075777512 -
Ewelink Devices, DIY Mode Switches, Smart Home
SONOFF MINIR2 – Two Way Wi-Fi Wireless Smart DIY Switch Turn traditional switch to Smart WiFi Switch With Timer Internet Work With AMAZON Alexa,google Home ,Nest
Ewelink Devices, DIY Mode Switches, Smart HomeSONOFF MINIR2 – Two Way Wi-Fi Wireless Smart DIY Switch Turn traditional switch to Smart WiFi Switch With Timer Internet Work With AMAZON Alexa,google Home ,Nest
- Control your home appliances with the app.
- Ask devices to turn on/off just by a voice command.
- Set a time for devices to make it start or stop running automatically.
- Allow developers to flash the firmware to access more features they want.
- Support the rocker light switch to control devices (self-return switch not included).
- Create smart scenes to trigger groups of SONOFF devices on/off via tapping on your phone.
- Make an action to trigger another or receive a message alert to your phone.
- Share the device with your family to control it together.
- Check the device status change on your phone in real time.
- Run the device on your phone albeit no normal Wi-Fi connection.
- Keep the device in the status before power failure when the electricity system is restored.
SKU: M0802010010 -
Ewelink Devices, DIY Mode Switches, Smart Regulator
SONOFF iFan04-H: Wi-Fi Ceiling Fan And Light Controller -Turn traditional fan to Smart WiFi fan With Timer Internet Work With AMAZON Alexa,google Home ,Nest
Ewelink Devices, DIY Mode Switches, Smart RegulatorSONOFF iFan04-H: Wi-Fi Ceiling Fan And Light Controller -Turn traditional fan to Smart WiFi fan With Timer Internet Work With AMAZON Alexa,google Home ,Nest
【Direct Replacement】Simply replace your existing ordinary ceiling fan with lights controller with iFan04, you will immediately get a smart ceiling fan with lights.
【APP&433MHz RF Remote Control】Through eWeLink App, you can remotely control the ceiling fan with lights with ease on iOS & Android smartphone anywhere and anytime. The device can be also controlled via the RM433 remote controller (included in the package). The small 433MHz remote controller design allows you to hang it on the wall as a wireless wall switch or remove it as a remote control as required.
【3 Fan Speeds】The APP enables you to choose low, medium, and high fan speed to keep your room comfortable. Besides, RM433 remote controller can be also used to adjust coolness level as you desire.
【Timer&Schedule】By presetting single, repeating, and countdown timers, the iFan04 WiFi Ceiling Fan&Light Controller can be automatically turn on/off at a specific time.
【Hands-free Voice Control】SONOFF iFan04 is compatible with Amazon Alexa ( Amazon Echo/Echo Dot/Amazon Tap) and Google Home Assistant. It allows you to use your voice to control your ceiling fan with lights and enjoy a hands-free experience.IFan04-H is suitable for 220-240V high-voltage countries and regions.
SKU: 6920075776751
R***N –
perfect it works inmediately in home assistant!! no need to flash. it detects ALL my zigbee devices in few seconds by using zigbee2mqtt addon!! thanks bangood
R***N –
U***Y –
Works perfectly. Modded it with an SMA connector, plugged it in, fired up zigbee2mqtt, and worked straight away.
U***Y –
i***o –
Great product, I had no problems flash a new firmware andO it’s a great low cost coordinator.
i***o –
Mu****li (verified owner) –
Does not work with home assistant. Don’t buy.
Mu****li –